中文

The Master Station and Slave Station of the Train MVB Bus

    The working mode of the MVB bus is as follows: Only the bus master station (bus manager) issues the master frame, and the slave devices send slave frames in response to the master frame. The slave devices can only respond passively and do not actively send slave frames.

 

    The master device, or the bus manager, is usually referred to as the master station.

 

    The slave devices are usually called slave stations, and the network cards used for MVB communication by slave stations are often called MVB slave station cards.

RELATED PRODUCTS

MVB-UDP Ethernet to MVB Module
  • 1x MVB interface, supporting EMD and ESD+
  • 1x Ethernet interface for MVB-to-UDP protocol conversion
  • 1x UART serial port for MVB-to-serial port conversion
  • Supports the MVB slave station function and PD data acquisition
  • Software, hardware design reference and evaluation board are provided
DETAILS
MVB-CAN-UART MVB Embedded Module
  • 1x MVB bus interface, supporting EMD and ESD+
  • 1x UART serial port for MVB-to-serial port conversion
  • 1x CAN bus interface for MVB-to-CAN bus conversion
  • + 5V power supply, low power consumption
  • Wide temperature range from -40°C to +85°C
  • Provides a comprehensive development kit
DETAILS